We need a Space option that will allow the Space to follow the geometry it is associated too. thus if the space aka walls move the Space updates to suit. Revit offers this, and it is a limitation for OBD users

If we delete files from the Design folder (our workset) and these files were used in Program Manager for Design Options, we should have notification when we start OBD that there are no these files and existing Design Option was changed.

It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...

In Parametric Cell Studio OBD CE 2023, the tab to indicate Family and part is not shown. The attribute must be indicated manually. More time and more mistakes. Requested: Adding the family and part tab for PCS components See explanatory image.

When a PAZ cell is modified with PCS, the modified copy appears at point 0,0,0. The previous copy remains. It is requested: change this behavior and replace the modified cell in its place of placement, as it worked in OBD V8i See attached video

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

Apparently, the PM can do selective updates by allowing the user to select the cutting (or cut ?) element. The PM records the associated elements ElementIDs, presumably. Any callbacks triggered by manipulation by Mstn/OBD tools are recorded by the...

The current global 'all or nothing' updates are only useful 5% of the time. For the bulk of the updates a step by step update is required. No engineering team is going to be happy relying on the vendor's algo without the assurance of visual inspec...

Penetrations are quite complicated and not easily defined by a few rules. The current selection of rules I think will be quickly overwhelmed. As such, I can see most people decoupling the Penetration objects from the PM as soon as possible, then e...

See this thread https://communities.bentley.com/products/building/building_analysis___design/f/aecosim-speedikon-forum/234812/report-on-clash/738991#738991 The way we use it now is in a teams session with all consultants. I share my screen and run...