Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Structural

Showing 15 of 192

Set default placement based on PS shape.

When placing certain member types, not need to remember the offset rotation and position. It would be good to be able to set these.
4 months ago in OpenBuildings Designer / Structural 1 Already exists

Allow Geometry to be constrained by Floor,

A heavily requested feature is to allow objects to be constrained by floor plane. If the floor level adjusts the geometry adjusts. Reference planes with object associations (Speedikon GAP analysis)
over 4 years ago in OpenBuildings Designer / Architectural / Buildings Systems / Structural 2 Future consideration

Associate structural elements to grid lines

Structural elements are associated to grids so changes to grid layout will propagate to associated elements, such as beams, columns, bearing walls, and footings.
almost 3 years ago in OpenBuildings Designer / Structural 0 Future consideration

Creation of structural foundations in OBD

Currently it is not possible to create dedicated "Footing" / foundation elements in OBD. The workaround is to use Beams (for strip foundation) or Columns (for pad foundation). However it's not an ideal situation. Proconcrete of course does offer t...
over 2 years ago in OpenBuildings Designer / Structural 2 Future consideration

Clean-up Walls(and other forms) Through References

In a federated model, if I have 2 walls in separate files, it can be very difficult to clean up walls that are interacting between different models. We need to allow the Connect Wall tool (specifically connect as L Parallel and Connect Forms as L ...
over 4 years ago in OpenBuildings Designer / Architectural / Structural 0 Future consideration

Place PS Member Mirrored

Very handy option we had with OBD members was to place a member mirrored. Great for modelling channel sections.
about 2 years ago in OpenBuildings Designer / Structural 2 Planned

Penetrations: Config/Rule per Penetration Object

The new Penetrations tool introduced in U10 is pretty promising. But, the current assumption that there a large 'classes' of Penetrations is flawed. There also needs to be a way to support Penetration rules/ config at Penetration level. Each Penet...
about 2 years ago in OpenBuildings Designer / Structural 1 Future consideration

Clean-up Walls in References

In a federated model, if I have 2 walls in separate files, it can be very difficult to clean up walls that are interacting between different models. We need to allow the Connect Wall tool (specifically connect as L Parallel and Connect Forms as L ...
almost 3 years ago in OpenBuildings Designer / Architectural / Structural 0 Future consideration

Structural Tool Open to Last Library Instead of Reset

Each time you go to place a structural member the tool resets to the base directory of the libraries. It would save a LOT of time is the tool remembered the last library list used and defaulted there instead of resetting to the beginning. It can b...
9 months ago in OpenBuildings Designer / Structural 0 Already exists

Export OBD Structural to Dlubal RFEM 6

For our structural analysis we are currently using the new RFEM 6 from Dlubal-Software and for the design part we are using Openbuildings Designer.In our BIM oriented projects we exchange our data between RFEM 6 and Openbuildings Designer mostly b...
over 1 year ago in OpenBuildings Designer / Structural 0 Needs review