In OBD V8i there was the possibility of referencing a cell as a drawing symbol in BXC. It could then be embedded and saved as a drawing symbol.In OBD 2023 the behavior has changed and they appear in red and the cell cannot be embedded as a drawing...

In Parametric Cell Studio, there is the possibility of placing handles to change the dimension of a measurement. The change updates the dimensions of the entire cell.It would be interesting to be able to use this option in Parametric Cell and not ...

Staircase encounters with the slab are not considered in OBD. It would be interesting to be able to adjust them directly in the stair settings so that they are similar to reality when they are built.See image

When placing a parametric cell, the preview of the top view symbols is displayed correctly if they are activated in the Building settings. If they are not activated in the Building settings but Named Presentation is activated, the top view and the...

The behavior of parametric cells must be improved in order to replace PCS and BXC to create doors and windows.When modifying a parametric door, strange behavior is observed. If the width is enlarged with the handle, the door is not modified in the...

Generate element ID numbers based on their floor number and space location. For examples, manually label a space "03" on the first floor, becomes "103". A door that is manually labeled "A", opening into room 104 becomes "104A"

Currently it is not possible to create dedicated "Footing" / foundation elements in OBD. The workaround is to use Beams (for strip foundation) or Columns (for pad foundation). However it's not an ideal situation. Proconcrete of course does offer t...

OBD's Profile tool is quite powerful. A lot of building elements are linear and can be modeled this way. Mstn's new Perforator tool is also powerful as it complements solid modeling by providing the 'negative' of solids ie voids. Together, both fu...

The fact that element fill in display style "Filled Visible Edges" only works when Visible Edge setting is set to "Dynamic" is really annoying! For example making Elevation drawings wanting to use a simple fill on steel SW panels or window/door fr...

When you group elements it creates an orphan cell so when you apply Part and Family it only applies to the Cell Header not all the elements in the Group "orphan cell". Need to have a "Change Whole Elements" like there is in the Change tool. And on...