Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Speed up designing with OpenBuildings Designer

I have a problem. Sometimes OBD will crash without any warning. All my projects are very big. > 10GB on third parties files. And when I want to place a pipe or a valve, it took a 8-9 seconds to show up the Place component menu. I think there mu...
over 3 years ago in OpenBuildings Designer / Buildings Systems 8 Future consideration

Railing with baseboard

The problem is that it is not possible to use a flat iron profile from the standard catalog because this profile is always placed horizontally instead of vertically on the railing. I have not found a way to place the profile rotated by 90 degrees....
almost 3 years ago in OpenBuildings Designer / Buildings Systems 2 Future consideration

Energy Sim - Views

When using energy simulator to only run heat gain and loss calculations, it is unclear where the drawn rooms on any floor are looking at the plan view as the ceilings/floors above show up over the top. Can there be a way to see the drawn rooms wit...
6 months ago in OpenBuildings Designer / General 4 Needs review

Mitre Elbows in Plumbing

The uses of mitred elbows is a standard. there is Mitred elbows in the ducting system but not in the Plumbing system.
3 months ago in OpenBuildings Designer / Architectural 0 Future consideration

Associate structural elements to grid lines

Structural elements are associated to grids so changes to grid layout will propagate to associated elements, such as beams, columns, bearing walls, and footings.
almost 5 years ago in OpenBuildings Designer / Structural 0 Future consideration

Double Angles and Channels as 2 Single Angles

The Combined shape option is too time consuming to create for this content. It also does not transfer to other applications (ProStructures, TEKLA, Etc.). These applications want to display them as two separate angles. The spacing is dictated by th...
over 1 year ago in OpenBuildings Designer / Structural 2 Already exists

Allow Updates to Cached Drawings with missing references

If a reference is removed from a composition model, then any cached drawings referencing Saved Views from that composition model will get an error message that prevents the cached DV from updating. There are several reasons that users may want to ...
over 3 years ago in OpenBuildings Designer / General 4 Future consideration

Trim/Extend Multiple Walls

The Connect Walls command only works on 1 wall at a time. If the users need to extend multiple walls to touch another wall, the user must click the same wall multiple times. We should strive to match the workflow available in the Trim to Element C...
over 6 years ago in OpenBuildings Designer / Architectural 2 Future consideration

Set Active Grids per selected building

current 'set active grids' function select all buildings defined in floor manager as default. It will be good to turn on only selected building in Floor Selector as default.
about 1 year ago in OpenBuildings Designer / General 0 Future consideration

Slope of the staircase needs to be ajdusted

Currently, in OBD, the slope of the staircase is not adjustable. Length/slope is directly proportional to the stair tread depth. If we increase the depth of the tread than length/slope of the staircase also changes. There should be flexibility in ...
7 months ago in OpenBuildings Designer / Structural 0 Future consideration