It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...

In Parametric Cell Studio OBD CE 2023, the tab to indicate Family and part is not shown. The attribute must be indicated manually. More time and more mistakes. Requested: Adding the family and part tab for PCS components See explanatory image.

When a PAZ cell is modified with PCS, the modified copy appears at point 0,0,0. The previous copy remains. It is requested: change this behavior and replace the modified cell in its place of placement, as it worked in OBD V8i See attached video

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

Allow the option "From Shape" in Create Slab to accept input shape located in a referenced file. Now as a workaround I first have to copy these shapes from the refernce into active design file, then I can use the Create Slab From Shape

Add support for IFC4 export with textures as entities IfcBlobTexture, IfcPixelTexture or IfcImageTexture. This would allow to deliver results in IFC even if yet not all IFC viewers/editors can handle textures. See how these examples work with late...

It would be very useful if we could control the appearance of centerlines using the Display Rules

Many users (CrossRail, TFL) working on stations would like to be able to define a "floor" that is inclined for use cases such as tunnels and ramps between platforms etc.

When creating families and parts i/e/ a door, we need an option to MATCH Wall. This was available in PCS, but not in MS or OBD. As it stands you need to place a 3d slab that is your perforator = your cut depth. This s very limited. We need an opti...

In OBD > 10 you can schedule a single wall and wall assembly. However, what you cannot do is schedule the wall assembly layers aka sub walls and maintain their real family/part names. OBD will schedule them as 'Default' walls rather than the ac...