When a PAZ cell is modified with PCS, the modified copy appears at point 0,0,0. The previous copy remains. It is requested: change this behavior and replace the modified cell in its place of placement, as it worked in OBD V8i See attached video

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

It would be great to provide a way to assign a Named Group to any placed Objects and Assemblies, including the OOTB objects like Walls, Slabs etc. This will allow the user to manipulate multiple elements efficiently without having to nest within a...

Addressing overheating due to solar gain is increasingly a big problem for building designers, and is now also a statutory requirement. OBD/OBES/Hevacomp is well placed to provide an analytical design tool that provides quick feedback to the facad...

At the moment we find two different data for areas: net area and gross area. However, there is only one volume available that can be shared in plans and spreadsheets: the gross volume, calculated as gross area * room height. In order to have an ov...

Similar as in the Grid manager we need the option for the floor manager to "Rotate by points" so that a building can be positioned and rotated properly.

In today's BIM world the "I" of information becomes more and more important. This information is driven mostly by the properties attached to an element, more than by it's geometry. OBD already has a lot of built-in properties, also when it comes t...

It would be good to integrate OVC into OBD. Very few will be able to justify paying for the PS license just to get OVC inspite of its benefits. Link to previous discussion. OVC would also be very useful enabling tool for updating OBD's Place Objec...

The new CS tool looks very limited in scope. It would be good to extend its viability by supporting meshes. Flooring is rarely level or flat when you look across a project. It would be good to have an option that is based on Mstn's Thicken tool th...

Any Constraints applied to the Mstn elements seem to be stripped out when the Assembly is placed. Apparently, this is a 'voluntary' decision by the Mstn team. Item Types seem to make it through OK which is good. It would be good to bypass this 'vo...