Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Showing 95

Option to ungroup components placed as array parametric solid

Filing this idea on behalf of B+S AG | Stefan Schöni. While using the command "Array parametric solid feature", the components are 'grouped' - this is still the case in the IFC file. This means that no evaluations can be made because, for example,...
about 2 months ago in OpenBuildings Designer / General 1 Future consideration

Need sloped slab from compound slab option

Team needs it and creating sloped slab now is a challenge.
2 months ago in OpenBuildings Designer / Architectural 3 Future consideration

Parametric cell and repeated drawing symbols

In Parametric Cell Studio, lines, rectangles, etc. could be repeated a number of times according to a variable to represent the top view drawing, for example. In parametric cells, this is not possible. It is possible to use a parametric solid arra...
3 months ago in OpenBuildings Designer / Architectural 1 Future consideration

Parametric cells need to place handles

In Parametric Cell Studio, there is the possibility of placing handles to change the dimension of a measurement. The change updates the dimensions of the entire cell.It would be interesting to be able to use this option in Parametric Cell and not ...
3 months ago in OpenBuildings Designer / Architectural 2 Future consideration

Resolve slab encounter with stair

Staircase encounters with the slab are not considered in OBD. It would be interesting to be able to adjust them directly in the stair settings so that they are similar to reality when they are built.See image
3 months ago in OpenBuildings Designer / Architectural 1 Future consideration

Parametric Cell does not display drawing symbols correctly

When placing a parametric cell, the preview of the top view symbols is displayed correctly if they are activated in the Building settings. If they are not activated in the Building settings but Named Presentation is activated, the top view and the...
3 months ago in OpenBuildings Designer / Architectural 1 Future consideration

Improve parametric cells for doors and windows

The behavior of parametric cells must be improved in order to replace PCS and BXC to create doors and windows.When modifying a parametric door, strange behavior is observed. If the width is enlarged with the handle, the door is not modified in the...
3 months ago in OpenBuildings Designer / Architectural 2 Future consideration

Unify different parts in each drawing

It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...
4 months ago in OpenBuildings Designer / Architectural 1 Future consideration

Reconstruct hidden wall joints

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...
4 months ago in OpenBuildings Designer / Architectural 1 Future consideration

Railing Prostructures section placement point

When you are choosing the Prostructures members in any of the areas the member is always Place top Center. Need to be appy to choose the placement point E.G. Centre - Center
5 months ago in OpenBuildings Designer / Architectural 1 Future consideration