If you have a building that contain a series of walls, if the building is rotated away from the horizontal and apply materials via the family and parts. when the building is cut the materials are never aligned with building ie a wall (see image) I...
room ref numbers on the layout cannot be relocated
Sometimes we do not have room references from architects and we need to create them ourselves. We need to be able to show clearly the location of particular room on the layout - it can be done in wireframe top view. Unfortunately sometimes room nu...
English translation: Please add a design for fixing points in the pipe support. The fixed support of the pipe system (i.e., all three-way displacements must be constrained to 0) requires a combination of a guide and a limit support. Two hangers will be generated when generating the hanger. Original text: 请在pipe的支架中增加固定点的设计。管系的固定支架（即三向位移都要被约束为0）需要用一个导向加一个限位支架组合，生成支吊架的时候会出现两个支吊架.
请在pipe的支架中增加固定点的设计。管系的固定支架（即三向位移都要被约束为0）需要用一个导向加一个限位支架组合，生成支吊架的时候会出现两个支吊架。请增加一个固定支架选项English translation: Please add a design for fixing points in the pipe support. The fixed support for the pipe system (i.e. all three-way displacements are constr...
Being able to input a ceiling plenum after an exposed ceiling design change
Currently there is no way to change from an exposed ceiling design to now a ceiling plenum without starting again once created. Designs change so this should be an easy change also
Filled spaces are not displayed with display rules
A behavior that should be corrected.
By indicating filled spaces in dynamic view, the spaces are not shown filled. If we indicate display rules for these spaces in dynamic views, the spaces are shown as indicated by the display rules but are no...
HI Bentley I was just looking at Revit/Rhino/Grasshopper and they are all linked via a tool called Rhino Inside. https://www.rhino3d.com/inside/revit/1.0/ When revit, rhino and grasshopper are linked, the tool sets are added to each of the 3 appli...
The AccuDraw compass is rotated to the element snapped to. Very often not to view xy. So the x and y fields in the AccuDraw dialog are not view xy. Very unintuitive. Like in the attached video. The AccuDraw compass has a red and green marking for ...
When we have file A active and B and C referenced, selecting B and using Exchange is simply equivalent to opening file B. The ideal function would be to open file B with A and C referenced.
0
Needs review