It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...

In Parametric Cell Studio OBD CE 2023, the tab to indicate Family and part is not shown. The attribute must be indicated manually. More time and more mistakes. Requested: Adding the family and part tab for PCS components See explanatory image.

When a PAZ cell is modified with PCS, the modified copy appears at point 0,0,0. The previous copy remains. It is requested: change this behavior and replace the modified cell in its place of placement, as it worked in OBD V8i See attached video

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

At the moment we find two different data for areas: net area and gross area. However, there is only one volume available that can be shared in plans and spreadsheets: the gross volume, calculated as gross area * room height. In order to have an ov...

For our structural analysis we are currently using the new RFEM 6 from Dlubal-Software and for the design part we are using Openbuildings Designer.In our BIM oriented projects we exchange our data between RFEM 6 and Openbuildings Designer mostly b...

Add support for IFC4 export with textures as entities IfcBlobTexture, IfcPixelTexture or IfcImageTexture. This would allow to deliver results in IFC even if yet not all IFC viewers/editors can handle textures. See how these examples work with late...

When creating families and parts i/e/ a door, we need an option to MATCH Wall. This was available in PCS, but not in MS or OBD. As it stands you need to place a 3d slab that is your perforator = your cut depth. This s very limited. We need an opti...

As discussed in this forum post https://communities.bentley.com/products/building/building_analysis___design/f/aecosim-speedikon-forum/243581/obd-u10-wall-opening-cuts-compound-slab It is currently not possible to create an opening with "Sense dis...

When filling a textcode using the funtionality of f(x) you can choose a lot of data used or filled in the component you've add in your model. But when you copied the component a view times in the model, you want to use the functionality of the tex...