It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...

In Parametric Cell Studio OBD CE 2023, the tab to indicate Family and part is not shown. The attribute must be indicated manually. More time and more mistakes. Requested: Adding the family and part tab for PCS components See explanatory image.

When a PAZ cell is modified with PCS, the modified copy appears at point 0,0,0. The previous copy remains. It is requested: change this behavior and replace the modified cell in its place of placement, as it worked in OBD V8i See attached video

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

Add support for IFC4 export with textures as entities IfcBlobTexture, IfcPixelTexture or IfcImageTexture. This would allow to deliver results in IFC even if yet not all IFC viewers/editors can handle textures. See how these examples work with late...

When creating families and parts i/e/ a door, we need an option to MATCH Wall. This was available in PCS, but not in MS or OBD. As it stands you need to place a 3d slab that is your perforator = your cut depth. This s very limited. We need an opti...

A correct steel beam with rounded corners is ofcourse looking better in a shaded view. But it is problematic in drawings front view as it will produce a lot of lines. Try an ifc from Revit or Tekla and you will see. Best would be if OBD could filt...

In a federated model, if I have 2 walls in separate files, it can be very difficult to clean up walls that are interacting between different models. We need to allow the Connect Wall tool (specifically connect as L Parallel and Connect Forms as L ...

Provide 3 options to all cut elements in a view: No fill, solid fill (black or gray), or original fill, instead of the current system which only shows the cut fills defined in the Part/Family system

The ability to automatically calculate space volume property which can be reflected in schedules.