Staircase encounters with the slab are not considered in OBD. It would be interesting to be able to adjust them directly in the stair settings so that they are similar to reality when they are built.See image

When placing a parametric cell, the preview of the top view symbols is displayed correctly if they are activated in the Building settings. If they are not activated in the Building settings but Named Presentation is activated, the top view and the...

The behavior of parametric cells must be improved in order to replace PCS and BXC to create doors and windows.When modifying a parametric door, strange behavior is observed. If the width is enlarged with the handle, the door is not modified in the...

It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...

Problem: Two walls with different parts that unify each other (section and F/R view). A wall must be demolished. The other wall must be maintained. If we visualize the two walls, we see the current state. The two walls are shown joined. This is...

If we delete files from the Design folder (our workset) and these files were used in Program Manager for Design Options, we should have notification when we start OBD that there are no these files and existing Design Option was changed.

Apparently, the PM can do selective updates by allowing the user to select the cutting (or cut ?) element. The PM records the associated elements ElementIDs, presumably. Any callbacks triggered by manipulation by Mstn/OBD tools are recorded by the...

The current global 'all or nothing' updates are only useful 5% of the time. For the bulk of the updates a step by step update is required. No engineering team is going to be happy relying on the vendor's algo without the assurance of visual inspec...

Penetrations are quite complicated and not easily defined by a few rules. The current selection of rules I think will be quickly overwhelmed. As such, I can see most people decoupling the Penetration objects from the PM as soon as possible, then e...

At the moment we find two different data for areas: net area and gross area. However, there is only one volume available that can be shared in plans and spreadsheets: the gross volume, calculated as gross area * room height. In order to have an ov...