In Parametric Cell Studio, lines, rectangles, etc. could be repeated a number of times according to a variable to represent the top view drawing, for example. In parametric cells, this is not possible. It is possible to use a parametric solid arra...

In OBD V8i there was the possibility of referencing a cell as a drawing symbol in BXC. It could then be embedded and saved as a drawing symbol.In OBD 2023 the behavior has changed and they appear in red and the cell cannot be embedded as a drawing...

In Parametric Cell Studio, there is the possibility of placing handles to change the dimension of a measurement. The change updates the dimensions of the entire cell.It would be interesting to be able to use this option in Parametric Cell and not ...

Staircase encounters with the slab are not considered in OBD. It would be interesting to be able to adjust them directly in the stair settings so that they are similar to reality when they are built.See image

When placing a parametric cell, the preview of the top view symbols is displayed correctly if they are activated in the Building settings. If they are not activated in the Building settings but Named Presentation is activated, the top view and the...

The behavior of parametric cells must be improved in order to replace PCS and BXC to create doors and windows.When modifying a parametric door, strange behavior is observed. If the width is enlarged with the handle, the door is not modified in the...

The current wall is fine as is but NOT complete. Works ok for interior walls but ignores what the true section looks like in section, No Blocking, Flashing etc. Honestly it is A+ for floor plans, it is the section that is pour. Plans never need th...

Currently the "Create space - Flood Area" only works on geometry in the active model. I'd be nice to also be able to use it with referenced geometry. See also Idea 138 - Create wall from space in Referenced File. Making this possible would probabl...

Rule system to reduce area/volume of rooms based on sloped elements above, such as roofs and stairs, niches and floor-to-ceiling windows, and columns, in space reports

OBD tool should have parameter to round the corners (and ends) of the handrails? This is very common and required by the UK Bldg Regs. Also a big no-no for public stairs in stations for safety reasons. Dropping the handrail and trying to use the M...