It will be good if there is a way to use design history for DV drawing. At the end, we need to update/generate As-built drawings comparing with As-Design. Currently, we have to mark changes manually. Rather than this, it will be good to show versi...

Curtain Wall profile: Curtain Wall profiles are not parametrically editable. Hence, raising an enhancement request to allow changes to the curtain wall profile using direct parameters, with more standard sizes to be added to the library/catalogue,...

Label Co-ordinates not working on the staircase Hence raising an enhancement request to address this missing detail in OBD

Angular Grids do not display in the sections. Currently, grids that are angled and not perpendicular to the slice do not show up in Sections or Elevations. This results in missing angular grids on the drawing sheets. Additionally, when elevations ...

When a default value is used in dg in the workspace and later you locally modify it in the file, Openbuilding shows the locally modified. (Expected) The issue is when you export to ifc, then both the default and the locally modify value are export...

current 'set active grids' function select all buildings defined in floor manager as default. It will be good to turn on only selected building in Floor Selector as default.

I must a lot of fire dampfer in a building and it is a RFA file of Solid Air. It is all the same room, So I create a cell to copy this in other rooms. But when I want to create a schedule, This is not listed in the schedule. It can also be done by...

When working thought the various phases of a project, we have to develop a series of BIM objects based on the Level of Graphic Detail (LOgD) per design stage As a guide .. Concept design (CD) (stage 2 would typically be LOgD 200 Scheme Design (SD)...

In the floor manager, it should be possible to create multiple sites (ifcSite) and then select them. Currently, only one project (ifcProject) and one site (ifcSite) can be set per workset. Only multiple buildings (ifcBuilding) can be added. It is ...

Elements/Beams modelled in a particular floor level are not pinned with that level and need to move manually if there is any change in level through level manager