Hi Support. I have been trying to offset the top front face of a mullion of the top row of a CW and set it back by 20mm. Sadly this is not possible, the profile tool will not allow it. I then thought maybe I can use the cut tool and achieve the sa...

a large Bentley account (Big Ticket Project) is asking for a new Feature/Tool in creating a parametric Perimeter Fence. this feature shall; it behaves and be placed like a Railing tool or a Curtain Wall Tool. it follows the profile: linear Type &a...

It would be good to include this option. Its very rare that all sides of the space or room will have the same wall type. The user ends up having to delete or mod most of the walls or even worse not using the tool at all. With this option, the OBD ...

Team needs it and creating sloped slab now is a challenge.

In Parametric Cell Studio, lines, rectangles, etc. could be repeated a number of times according to a variable to represent the top view drawing, for example. In parametric cells, this is not possible. It is possible to use a parametric solid arra...

In Parametric Cell Studio, there is the possibility of placing handles to change the dimension of a measurement. The change updates the dimensions of the entire cell.It would be interesting to be able to use this option in Parametric Cell and not ...

Staircase encounters with the slab are not considered in OBD. It would be interesting to be able to adjust them directly in the stair settings so that they are similar to reality when they are built.See image

When placing a parametric cell, the preview of the top view symbols is displayed correctly if they are activated in the Building settings. If they are not activated in the Building settings but Named Presentation is activated, the top view and the...

The behavior of parametric cells must be improved in order to replace PCS and BXC to create doors and windows.When modifying a parametric door, strange behavior is observed. If the width is enlarged with the handle, the door is not modified in the...

It would be a good idea if in a drawing you could override part join configurations and create a new configuration for that drawing. For example, join all the walls, pillars, partitions, etc. in a floor plan or only join the walls of the same mate...