Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Showing 68

IFC entity mapping for subcomponents of Curtain Wall

The subcomponents Panels and Mullions of Curtain Wall now mapped to IfcBuildingElementProxy in IfcEntity when exported to IFC4 in OpenBuildings. Tried to modify the mapping options in the IFC Export dialog or edit the IFC_PartMapping_ifc4.set to a...
1 day ago in OpenBuildings Designer / General 0 Needs review

tool to create and update drawing schedule

It will save some time, reduce risk of mistakes and it will take away boring work and make you happier in front of OBD.
7 days ago in OpenBuildings Designer / General 0 Needs review

Open RVT files directly

It would be great to be able to open RVT files without having to use iTwins. Increasingly using BricsCAD BIM to open up RVT files to look at what is inside. Works great! A lot of manufacturers are providing their content as RVT files, instead of s...
9 days ago in OpenBuildings Designer / General 0 Needs review

New tool: Perimeter Fence Tool

a large Bentley account (Big Ticket Project) is asking for a new Feature/Tool in creating a parametric Perimeter Fence. this feature shall; it behaves and be placed like a Railing tool or a Curtain Wall Tool. it follows the profile: linear Type &a...
10 days ago in OpenBuildings Designer / Architectural 2 Needs review

Parametric Frame/Cell Builder

There is currently no effective means to generate and update Parametric / Compound Cells. Including the proxy view dependent geometry is key to reducing BV,DV generation times. Also needed to automate and coordinate detail drawing production. The ...
26 days ago in OpenBuildings Designer / General 0 Needs review

English translation: Please add a design for fixing points in the pipe support. The fixed support of the pipe system (i.e., all three-way displacements must be constrained to 0) requires a combination of a guide and a limit support. Two hangers will be generated when generating the hanger. Original text: 请在pipe的支架中增加固定点的设计。管系的固定支架(即三向位移都要被约束为0)需要用一个导向加一个限位支架组合,生成支吊架的时候会出现两个支吊架.

请在pipe的支架中增加固定点的设计。管系的固定支架(即三向位移都要被约束为0)需要用一个导向加一个限位支架组合,生成支吊架的时候会出现两个支吊架。请增加一个固定支架选项English translation: Please add a design for fixing points in the pipe support. The fixed support for the pipe system (i.e. all three-way displacements are constr...
about 2 months ago in OpenBuildings Designer / Buildings Systems 1 Needs review

Print constructions/fabric build-ups and data under Data Managers>Materials

The print option was available in the old Hevacomp. Open Building use similar UI so why remove the print option in the first place? The print would provide a comprehensive details of the u-value, g-value, condensation check, k-value of each of the...
2 months ago in OpenBuildings Designer / Buildings Services 0 Needs review

Individuell erzeugte Bauteile mit dem Zeichnungsfilter bearbeiten

Individuell erzeugte Bauteile mit dem Zeichnungsfilter bearbeiten. Individuell erzeugte Bauteile werden für den Unternehmensstandard benötigt. Die nachträgliche Anpassung im Zeichnungsfilter ist erforderlich und erleichtert die tägliche Arbeit er...
4 months ago in OpenBuildings Speedikon 0 Needs review

Allow batch mode without GUI

As per the manual (OpenBuildings Speedikon CONNECT Edition Update 4.2) , the export of IFC files can be batch processed by creating a job.lst file in PROJECT\des\bat\COMPUTERNAME\ife\job.ptk and then running speedm.exe "-mod" "design" "-prj" "proj...
4 months ago in OpenBuildings Speedikon 1 Needs review

Color 255

Nowadays there are lot of BIM technique with different CAD software. If I read an IFC in OBD other CAD software use color 255 in the Part and family. So when I want to plot or create a pdf file, this color doesn't show up on paper or pdf. Because ...
5 months ago in OpenBuildings Designer / General 1 Needs review