Currently, in OBD, the slope of the staircase is not adjustable. Length/slope is directly proportional to the stair tread depth. If we increase the depth of the tread than length/slope of the staircase also changes. There should be flexibility in ...

The following workflow results in upside-down text: - We have a 3D source model whose geometry displays non-orthogonal based on true real-world coordinates, which we attach to a container model as a reference.- We then rotate that reference attach...

The issue is that the only place the member gets the density is from the that part and family "Report Components Tab". so not able to have different materials EG stainless steel member that have the same part.there is a material garde in the data ...

Elements/Beams modelled in a particular floor level are not pinned with that level and need to move manually if there is any change in level through level manager

So, in OBD, you can activate a Prostructures license You are then able to place all the Prostructures items, but you need to know the key-in to get to all the Prostructures placements, It would be good if there were a way to get the Prostructures ...

Something that would be very handy is a tool that would move elements to a preset rl. This would be a much easier option over using the move command in large models. Would also be great is there was an option to flatten raked members.

The new Penetrations tool introduced in U10 is pretty promising. But, the current assumption that there a large 'classes' of Penetrations is flawed. There also needs to be a way to support Penetration rules/ config at Penetration level. Each Penet...

It could be useful to add a "Center" options for the label offset in (structural) rules. Now there is only "Above" and "Below", which makes sense in combination with single line resymbolization. However for eg. concrete beams that are wide enough ...

For Architectural and Mechanical drawing rules it is already possible to use the DG catalog to assign a rule to the elements it must be applied to. For Structural drawing rules only the Family/Part can be used. Please provide similar functionality...

Currently it is not possible to create dedicated "Footing" / foundation elements in OBD. The workaround is to use Beams (for strip foundation) or Columns (for pad foundation). However it's not an ideal situation. Proconcrete of course does offer t...